Appliance Care All problem guides

Problem Guides / Panasonic

Panasonic Washing Machine Noise or Vibration

Check level installation and load balance. Stop use if the machine makes a sudden grinding sound or moves severely.

What you can safely check

Check level installation and load balance. Stop use if the machine makes a sudden grinding sound or moves severely.

Model-specific note: Error-code meanings can differ by model, region and machine type. Confirm the code in the manufacturer manual before ordering parts or assuming a component has failed.

When to request a technician

Request an inspection if basic checks do not resolve the issue, the code returns, the machine trips power, leaks internally, or the drum will not turn. A displayed code identifies a condition; it does not by itself prove which part has failed.

Call Appliance Care More problem guides

Related Panasonic troubleshooting guides

Water Supply / Filling Problem

Panasonic codes vary by model. Check that the tap is open, the inlet hose is not kinked and water pressure is normal. Use the exact model manual to interpret the displayed code.

Read troubleshooting guide

Drainage / Not Draining

Check the drain hose for kinks or blockage and clean a user-accessible filter only as the manual describes. Persistent faults may involve the pump.

Read troubleshooting guide

Unbalanced Load / Not Spinning

Redistribute laundry evenly, reduce bulky loads and check that the machine is level. If spinning still fails, arrange service.

Read troubleshooting guide

Door or Lid Lock

Check for trapped fabric and close the door/lid fully. If the lock indication remains, the interlock may need inspection.

Read troubleshooting guide

Not Starting

Check the outlet, plug, programme setting and door/lid closure. If the machine remains unresponsive, do not open the electrical compartment.

Read troubleshooting guide

Water Leakage

Stop the cycle, close the tap and isolate power if safe. Check visible hose connections and request service for internal leaks.

Read troubleshooting guide

Not Spinning

Check the load balance, drain hose and selected cycle. Persistent failure may indicate a drain or drive-system issue.

Read troubleshooting guide

Cycle Stuck / Pausing

Some cycles pause for sensing, balancing or water heating. If the cycle repeatedly resets or fails to finish, note the model and error display for service.

Read troubleshooting guide

Poor Wash Results

Check detergent dose, load size, selected programme and accessible filter maintenance per the model manual.

Read troubleshooting guide